Garage Door Repair Blanchard can be a time-consuming process. Whether it’s an old single-panel door or a complex sectional system, the type of repair and the expertise of the professional will affect how long it takes.

Minor damage, like a dented panel, is easily repaired, but a misaligned track can take longer. Lubricating regularly keeps the moving parts working smoothly.

A broken cable can be the result of many different issues. It can be caused by a cable that needs to be properly secured or simply a cable that has stretched or frayed. A broken cable is a safety hazard for anyone in the garage as it could suddenly cause the door to fall. It can also create an imbalance that strains components like rollers and hinges.

Cables are under constant stress as they move up and down the garage door each time it is operated. They travel over pulleys and wind on a spool or cable drum. Over time, this part can wear out due to constant use or deteriorate from moisture near the bottom of the door. A professional can identify problems such as a worn-out pulley or spool, excess moisture, or improper tension and adjust or replace them as needed.

The cables are made of heavy-duty twisted wires that are galvanized to resist corrosion. However, over time, salt water exposure can corrode the metal and weaken the cables to the point where they break.

Performing a visual inspection of the cables on a regular basis will allow you to spot potential problems and replace them before they snap. You should look for signs of fraying, rust or excessive wear. It is recommended to lubricate the cables as well to reduce friction and extend their lifespan.

Depending on the style of your garage door, there will be either one or two cables per side. The first step in replacing the cable is to open your garage door as far as it will go and set a ladder under the track near the last roller. Repeat the ladder and locking pliers or C-clamps procedure on both sides of the door to prevent it from closing unexpectedly. Locate the old cable and note which way it was traveling in the pulley. This will help you to align the new cable correctly.

Damaged Panel

There are various ways that your garage door can become damaged, including general wear and tear, water or mold damage, and impact-related damage from vehicles or sports equipment. Depending on the type of damage, it may be necessary to have the panel repaired or replaced. While some homeowners may try to do DIY repairs, this isn’t always the best option. The complexity of the process, the specialized tools needed, and the weight of your garage door make it an area where it’s often better to leave the task to professional repair technicians.

The location of the damaged panel plays a big role in whether it’s something that requires repair or replacement. A small dent or scratch isn’t likely to affect the functionality of your garage door, but damage near a hinge can significantly impact how the door operates. It’s also important to assess how much damage there is overall, as the more widespread it is, the less likely it will be that replacing a single panel will address the issue.

In some cases, a faulty spring or other mechanical failure could be the root cause of a specific damaged panel. This means that the problem is more extensive than just that one panel and needs to be addressed along with any other repairs required. It’s important to work with a company that offers comprehensive services to ensure that any additional issues are addressed and resolved, as well as to provide preventive maintenance to extend the life of your garage door and avoid future problems.

Replacing a garage door panel can be complicated, especially if it’s an older model that was manufactured before the industry standardization of components. If you’re able to find a replacement that matches the existing style, it can be a simple and cost-effective solution to your problem. However, if you’re not able to find a matching panel or if the other panels are in worse condition, it might be more practical to consider an entire replacement. The good news is that if you take the time to perform regular inspections, preventative maintenance like lubrication, and install protective measures, your garage door should last a long time before it will require a replacement or need full repair.

Weather Stripping

Weather stripping fits between your door and the frame or threshold of your home to prevent air and light from leaking through. It can be made from a wide variety of materials including felt, foam tape, vinyl or metal. It’s a good idea to inspect it regularly to ensure that it is still intact and functioning properly.

It can also be helpful to keep a few types of weather stripping on hand for quick repairs and replacements. Felt is one of the most common and inexpensive options that can be found at many home centers, lumber yards and hardware stores. It is easy to use by cutting to length with scissors, peeling off the adhesive backing, and pressing firmly against the door stop. It typically lasts a year or two before it needs to be replaced.

Foam tape is similar to felt but offers more durability. It is usually a thicker material than felt and has a more advanced adhesive that makes it easier to install. It’s not as vulnerable to moisture as felt but is still less durable than rubber. It’s available in a range of widths and thicknesses to accommodate most garage doors.

Another popular option is compression weather stripping, which is a thin piece of rigid foam that mounts into a slot on the door stop. This type of weatherstripping is more durable than felt and can be adjusted to fit a wider range of door sizes.

If you’re worried that your weather stripping is no longer providing a barrier to the elements, try this simple test: wet your hand and place it against the surface of the door or window. If it feels cool, that indicates that a draft is coming through the gap, and it’s time to invest in some new weather stripping.

Another effective way to seal the gaps around your doors is to add a bottom door sweep. These are often composed of a metal strip that screws onto the bottom of the door (the header) and a nylon brush or piece of nylon that extends to the floor (the sweep). It’s simple to install but can be more effective than just using a single foam strip.

Broken Spring

The springs of your garage door are a vital component in opening and shutting the door. They store and release energy by twisting in tightly wound coils. When they reach their breaking point, they can snap with a loud bang. If your spring is broken, it’s time to call a professional for repair.

One of the first signs of a broken spring is an inability to open the door. A torsion spring stores energy in a series of coils, so when the spring breaks, there isn’t enough tension to lift the door. Instead, the door will likely open or close slowly or with a jerky motion.

Another sign is a visible gap between the coils of your torsion spring. If you notice a gap, the spring has already reached its breaking point and no longer holds enough energy to work properly. It’s important to replace both springs if one is broken, as the other will not be far behind.

Garage door springs are dangerous and require professional replacement if they break. In fact, people have been maimed or even killed when they try to replace their own garage door springs without proper training and knowledge.

To remove a broken torsion spring, you’ll need to disconnect the power and clamp the door to prevent it from moving. Then, you’ll need to release the tension on the cable drum. Once the cable is free, you’ll need to disconnect the motor. You can then unwind the remaining springs using a steel bar. When you’re done, you should have a new spring with the right size and length. To make sure your new spring is the same size as the old one, measure it when it’s completely relaxed to find its length and inside diameter.